1.05 CT Pear Brilliant Cut Engagement Ring in 18kt White Gold

This pear halo engagement ring sets a 1.05 carat pear-shaped diamond inside a halo of pave diamonds, on a white gold band lined with more diamonds. As photographed, it is paired with a contoured yellow gold diamond ring enhancer that hugs it from above and below, so the whole piece reads as a two-tone pear diamond bridal set. The diamonds total 2.05 carats. Everything below describes this exact piece, which you can see at our Boca Raton showroom.

The pear halo engagement ring at a glance

Here are the specifications of this pear halo engagement ring, as recorded for this piece.

The center stone is a pear brilliant cut diamond of 1.05 carats, graded J color and SI1 clarity. It points toward the fingertip and is held in prongs, with a V-shaped prong protecting the tip.

Around it is a halo of small round diamonds, set in white gold and edged with fine milgrain, and the white gold band carries a row of pave diamonds on each side.

The record lists 110 round accent diamonds totaling 1.00 carats, graded H color, across the set. Together with the pear, that makes 2.05 carats of diamonds.

The engagement ring is 18kt white gold. The enhancer bands that frame it are yellow gold, which gives the set its two-tone look.

Why a pear shaped diamond engagement ring

The pear shape, also called a teardrop, combines the rounded end of an oval with the point of a marquise. On the hand, the point draws the eye along the finger and makes it look longer and slimmer.

A pear shaped diamond engagement ring also looks larger than a round diamond of the same weight. Because the stone is elongated, more of its surface faces up, so a 1.05 carat pear shows a generous face.

Pear diamonds are brilliant cut, with facets arranged to return light much like a round brilliant, so they sparkle brightly. And because the shape is less common than round or oval, a pear shaped diamond engagement ring feels distinctive without being unconventional.

The point of a pear is its most delicate part. Here it is protected by a V-shaped prong and by the surrounding halo, which takes the knocks that would otherwise land on the tip.

Pear, oval or round?

If you are deciding on a shape, it helps to compare the three most popular choices.

A round diamond has the most sparkle of any shape and the most traditional look. It is symmetrical from every direction and pairs with any band.

An oval is softer and elongated, and it makes the finger look longer. It is a quieter, classic choice.

A pear combines the two: the rounded end of an oval with a single point. It has more movement and personality than either, and it looks larger for its weight than a round. In a halo, the teardrop outline is especially striking, because the diamond border traces the point.

If you are unsure, try all three on. We can show you a round solitaire, an oval and this pear halo engagement ring side by side.

Which way should the point face?

Most people wear a pear diamond with the point toward the fingertip, as this ring is designed. That direction lengthens the finger and gives the classic teardrop look.

The contoured enhancer bands on this set are shaped to follow the halo in that direction: the upper band arches around the rounded end and the lower band dips around the point. That is why the set sits so neatly as one piece.

The halo

The halo is a border of small round diamonds that follows the teardrop outline all the way around the center stone. Its outer edge is finished with milgrain, a fine beaded line that gives the halo a crisp, vintage-inspired finish.

A halo does two things for a pear diamond. It makes the center look noticeably larger, because the sparkle of the border extends the outline of the stone. And it adds brilliance, so the whole head of the ring lights up.

It also helps with color. The center is graded J, at the warmer end of the near-colorless range. Surrounded by bright white halo diamonds in white gold, it faces up whiter than it would on its own.

That combination of size, sparkle and protection is why the pear halo engagement ring has become one of the most loved engagement ring designs.

The diamond ring enhancer

What makes this piece unusual is the enhancer. A diamond ring enhancer, sometimes called a wrap or a ring guard, is a band designed to fit around an engagement ring rather than simply sit beside it.

Here, two contoured yellow gold bands, each set with pave diamonds, curve around the pear halo: one arches over the top of the halo and the other dips beneath its point. With the engagement ring in the middle, the three bands stack into a single, wide, sparkling set.

A diamond ring enhancer transforms the look of a ring. On its own, the engagement ring is a classic pear halo; with the enhancer, it becomes a bold statement piece with far more diamonds and a warm frame of yellow gold.

The contoured shape also solves a common problem. A pear halo head is wide, so a straight wedding band often leaves an awkward gap. Contoured bands follow the shape of the halo exactly, so everything sits flush.

A two tone engagement ring set

The mix of metals is a big part of this set's character. The engagement ring is white gold, which keeps the pear and its halo looking crisp and bright. The enhancer bands are yellow gold, which frames the white center with warmth.

A two tone engagement ring set like this is easy to wear with any other jewelry. It works alongside both white and yellow gold, so there is no need to choose one metal for your watch, earrings or bracelets.

The contrast also shows off the design. Against the yellow gold, the white gold halo stands out clearly, so the teardrop shape reads from across a room.

The diamonds

The pear diamond is 1.05 carats, J color and SI1 clarity. J color may show a hint of warmth on its own, but in a white gold halo it faces up bright. SI1 means slightly included; the inclusions are visible under 10x magnification and not to the eye in normal wear. Our guide to diamond color shows where J sits on the scale.

The 110 accent diamonds total 1.00 carat and are graded H color, near-colorless. Their job is to create a continuous surface of sparkle around the center and along the bands, and at this size they do it beautifully.

For how color, clarity, cut and carat fit together, see our guide to the diamond 4Cs, or the Gemological Institute of America introduction to diamond quality.

A pear diamond bridal set

Buying the engagement ring and the enhancer together as a pear diamond bridal set has real advantages. The pieces were made to fit each other, so there is no search later for a band that matches the shape of the halo.

It also means the set is complete from the start. Many couples wear the engagement ring alone at first and add the enhancer at the wedding, so the full set marks the day.

And because the bands frame the ring above and below, the set can be worn in different ways: the engagement ring alone for a lighter look, or the full set for occasions.

Wearing a wide bridal set every day

With three bands stacked together, this pear diamond bridal set is wider than a single ring, and that changes how it feels. Most people adjust within a few days, but it is worth knowing before you buy.

A wider set often needs to be a quarter size or so larger than a single band for comfort, because it covers more of the finger. We will measure you with the full set on, not just the engagement ring, so the fit is right.

Pave diamonds on both sides of the bands mean the set sparkles from every angle, but they also meet adjacent fingers. If that ever feels too much for daily wear, the engagement ring can be worn on its own and the diamond ring enhancer saved for occasions.

Styling a two tone engagement ring

A two tone engagement ring gives you freedom with the rest of your jewelry. Yellow gold watches, white gold earrings and mixed stacks all look intentional next to it, because the set already combines both metals.

For a coordinated look, echo the two tones elsewhere: a white gold chain with a yellow gold bracelet, for example. For a quieter look, let the ring be the only mixed-metal piece and keep everything else simple.

How to judge a pear halo engagement ring in person

Start with the shape of the pear. It should be balanced, with evenly rounded shoulders and a point that lines up with the center of the rounded end. A well-proportioned pear looks graceful rather than stubby or overly long.

Next, look for a bow-tie: a darker band that can appear across the middle of any pear diamond. Almost every pear shows some; what matters is how strong it is. Tilt the ring in different light to judge it.

Then look at the halo and the bands. The pave diamonds should be even in size and brightness, and the milgrain edges crisp.

Finally, try the full set on. A three-band pear diamond bridal set is wide, and it is important to see how it feels on your finger.

Planning a proposal

If you are planning to propose with this ring, a few practical points help. Sizing is easiest when you can borrow a ring your partner already wears on the ring finger, or ask a friend or family member who knows their size. If you are unsure, it is fine to propose with the ring slightly large and have it sized afterwards.

Many people propose with the engagement ring alone and keep the enhancer bands for the wedding day, when the full set comes together. Others give the whole set at once. Either way, we can package the pieces separately so you can decide.

Finally, keep the appraisal and receipt somewhere safe, and schedule the ring on your insurance before the big day, so it is covered from the moment it leaves our store.

Caring for your pear halo engagement ring

Pave and halo settings collect lotion and soap, which dull their sparkle. Soak the set in warm water with a drop of mild dish soap, brush gently around the halo and along the pave with a soft toothbrush, rinse and pat dry. Our jewelry care guide has more detail.

Take the rings off for the gym, gardening and cleaning, and have the prongs and pave checked every six months or so. We offer complimentary cleaning and inspection for jewelry bought from our store.

Seeing this pear halo engagement ring in Boca Raton

A pear diamond is best judged in person, and a set this wide always feels different on the hand than it looks in a photograph. You are welcome to try this pear halo engagement ring on at our Boca Raton showroom, with and without the enhancer, and look at the diamonds under a loupe.

We are open Monday to Friday, 9:30 to 5:30, and Saturday, 10:30 to 4:30. Directions are on our Visit Us page.

David Stern Jewelers has served Boca Raton for over 40 years. David Stern is a GIA Graduate Gemologist, so detailed questions about the diamonds can be answered on the spot.

Sizing, appraisal and insurance

The set can be sized to fit. Because the bands are set with pave diamonds, we will look at each piece with you and confirm how far it can be sized before any work is done.

It includes a written jewelry appraisal by David Stern, which gives a replacement value for insurance. We recommend scheduling the set on your insurance separately.

More engagement rings

Browse all our engagement rings, see our round solitaire engagement ring or oval lab grown engagement ring, or build your own ring.

Questions about this pear halo engagement ring